Wein HS Hot Shoe Slave (150' Range)
from Wein
- Attach directly to foot of any shoe-mount flash - no other connection necessary.
- Range up to 150 feet
- Constructed of aircraft aluminum and solid epoxy; virtually indestructible.
- Integral 1/4-inch - 20 threaded socket for tripod, monopod or light stand mounting.
- PC terminal for use with non-shoe flash units.
Sunpak Digital Slave Unit with Preflash Cancellation, Multi Flash & Sync Socket
from Sunpak
Wireless triggered Slave Unit with built-in flash of digital camera. Equipped with Multi-flash terminal and Sync. terminal.
Speedotron DS-1 Flash Activated Digital Slave Trigger with Hot Shoe Mount
from Speedotron
This slave with a hot-shoe contact for all portable flash units has been optimized to also work with digital cameras, as ordinary slave units do not work with most digital cameras that use a very rapid series of pre-flashes, that trigger the slave prematurely. It is Sensitive up to 100' (30.4 m) away. Working as an ordinary slave sensor, which will syncronize immediately with a master flash, the Speedotron DS-1 Digital Flash Trigger is also designed to work with digital cameras that use a pre-flash mode. This slave sensor switches from Normal Flash to Pre-Flash syncronization mode
Wein XL8E Micro Ultra Slave - Monoplug
from Wein
- High performance version of the original Micro Slave.
- Range up to 400 feet
- Ambient light-filtered or reliable outdoor use.
- Includes standard PC terminal as alternate sync connection.
Wein PN Peanut Slave (100' Range) - Set of 3 - for Digital Cameras
from Wein
- Tiny size, weighs less than 1/2 ounce!
- Up to 100 foot range (indoors).
- Solid epoxy won't crack, protects micro-circuitry inside.
- Standard PC sync connector attaches directly to Vivitar 283/285 or any other flash via PC or cord.
Many professional Nikon (D100) and Olympus E20N) SLR digital cameras have not one but TWO preflashes to fine tune the on board exposure computer. This will prevent standard slave units from working with these cameras WEIN products has duplicated the entire line of its popular solid state batteryless slaves in a digital format that can perfectly synchronize with digital preflash cameras
Wein PN Peanut Slave (100' Range) - Set of 3
from Wein
- Tiny size, weighs less than 1/2 ounce!
- Up to 100 foot range (indoors).
- Solid epoxy won't crack, protects micro-circuitry inside.
- Standard PC sync connector attaches directly to Vivitar 283/285 or any other flash via PC or cord.
Wein Replacement Foot/Slave for Vivitar 283/285 (FFA)
from Wein
- Slides on any flash foot with no other connection necessary.
- Built in slave has 150-foot range.
- Includes special hardware needed to attach slave to Vivitar foot as a permanent reinforcement or repair. No rewiring or factory service necessary!
- Built-in "H"-prong (female) terminal offers alternative to less reliable PC plugs, overrides slave when sync cord is connected.
- Aircraft aluminum housing with 1/4"-20 threaded socket underneath for tripod and lightstand mounting.
A hot shoe with a plus: adds remote control versatility to any shoe type flash, and repairs broken feet on Vivitar 283 or 285 strobes!
Wein HS-XL Hot Shoe Slave (600' Range)
from Wein
- Range up to 600 feet
- Built-in ambient light filter for outdoor use.
- Attach directly to foot of any shoe-mount flash - no other connection necessary.
- Constructed of aircraft aluminum and solid epoxy; virtually indestructible.
- Integral 1/4-inch - 20 threaded socket for tripod, monopod or light stand mounting.
Speedotron Slave Tripper
from Speedotron
slave tripper, remote light sensitive electronic switchA slave tripper (Speedotron #23510) may be installed in the Sync socket (in place of the sync extension) to fire the power supply.
+++
